Find Injection Molding Partners in Erie, Pennsylvania
Find top Injection Molding services in Erie, Pennsylvania. Connect with qualified manufacturers ready to handle your project with precision and efficiency.
Find Injection Molding Buyers in Erie →
Why Erie for Injection Molding?
16,000
Manufacturing Workers
500
Manufacturing Facilities
94,831
City Population
Erie, Pennsylvania is part of the Erie metro area and is home to major manufacturers including GE Transportation, LORD Corporation, Eriez. The Northeast region offers a strong manufacturing base making it an ideal location for injection molding services.
Injection Molding Capabilities
Injection molding is a manufacturing process for producing parts by injecting molten material into a mold. It is most commonly performed with thermoplastic and thermosetting polymers. Granular plastic is fed from a hopper into a heated barrel where it is melted, then forced under high pressure (typically 10,000-30,000 PSI) into a mold cavity. The material cools and solidifies into the shape of the cavity. Injection molding is the most common method for manufacturing plastic parts, producing billions of parts per year worldwide. It is ideal for high-volume production where tooling costs are amortized over large quantities.
±0.002" (±0.05mm) standard; ±0.001" achievable with precision molds
4-12 weeks for tooling; 1-4 weeks for production after tooling
$5,000-$100,000+ for tooling; $0.10-$10 per part in production
Major Manufacturers in Erie
Key employers in the Erie manufacturing sector include:
- GE Transportation
- LORD Corporation
- Eriez
Injection Molding in Erie — FAQ
How many Injection Molding providers are in Erie, PA?
The Erie metropolitan area has approximately 500 manufacturing establishments, many of which offer injection molding services. The area employs about 16,000 manufacturing workers, ensuring a skilled workforce for your project.
How many parts before injection molding is cost-effective?
Injection molding typically becomes cost-effective at volumes above 1,000-5,000 parts, depending on part complexity and tooling cost. For very simple molds, break-even can occur at a few hundred parts. For complex molds costing $50,000+, volumes of 10,000+ are usually needed.
How long does it take to make an injection mold?
Simple single-cavity molds take 4-6 weeks. Complex multi-cavity molds with side actions and precision requirements take 8-16 weeks. Rapid tooling options (aluminum molds) can be ready in 2-3 weeks for prototyping and low-volume production.
What plastics can be injection molded?
Most thermoplastics can be injection molded including ABS, Polypropylene, Polyethylene, Nylon, Polycarbonate, Acetal, PEEK, PPS, TPU, and many more. Some thermosets and elastomers (silicone rubber) can also be injection molded with modified processes.
What is the typical cycle time for injection molding?
Cycle times range from a few seconds for small thin-walled parts to 30-60 seconds for larger thick-walled parts. A typical cycle for a medium-complexity part is 15-30 seconds, including injection, cooling, and ejection.
Need Injection Molding Leads in Erie?
Tell us about your manufacturing capabilities and we'll show you exactly how to attract qualified buyers. No obligation.
Get Erie Injection Molding Leads →